| Partea Nu | Producător | Cerere |
|---|
| MT8888CS-1 | Mitel | Integrated DTMF transiver with Intel micro interface, enhanced to accept lower level signals. Applications credit card systems, paging systems, repeater systems/mobile radio, interconnect dialers and personal computers. |
| MT8885AN | Mitel | Integrated DTMF transiver with power down and adaptive micro interface. |
| MT9174AE | Mitel | 0.3-7V; 40mA; digital network interface circuit. For digital subscriber lines, high speed data transmission over twisted wires |
| MT8889CC/CC-1 | Mitel | 6V; 10mA; integrated DTMF transceiver with adaptive micro interface. For paging systems, repeater systems/mobile radio, credit card systems, personal computers, interconnect dialers |
| MT8979AP | Mitel | 0.3-7.0V; 30mA; CEPT PCM 30/CRC-4 framer & interface circuit. For DS1/ESF digital trunk interfaces, computer to PBX interfaces (DMI and CPI), high speed computer to computer data links |
| MT8885AN | Mitel | 6V; 10mA; integrated DTMF transceiver. For paging systems, repeater systems/mobile radio, credit card systems, personal computers, interconnect dialers |
| MT8967AS | Mitel | Intergated PCM filter codec. |
| MT8920BP | Mitel | 0.3-7.0V; +-25mA; ST-BUS parallel access circuit. For parallel control/data accessto T1/CEPT digital trunk interfaces; digital signal processor interface to ST-BUS; computer to digital PABX link |
| MT90733AP | Mitel | DS3 framer (DS3F). For subrate multiplexing, wideband data or video transport |
| MT9171AN | Mitel | Digital subscriber interface circuit. Applications digital subscriber lines; high speed data transmission over twisted wires; digital PABX line cards and telephone sets; 80 or 160 kbit/s single chip modem. |
| SP5658S | Mitel | 0.3-7.0V; 2.7GHz 3-wire bus controlled frequency synthesiser. For SAT, TV, VCR, cable tuning systems |
| MH88628 | Mitel | 0.3-65V; central office SLIC. For on/off-premise PBX line cards, central office line cards, DID line cards |
| NJ88C33MAMP | Mitel | 2.5-5.5V; frequency synthesiser. For cordless telephone (CT2, DECT), cellular telephones (GSM, PCN, ETACS), hand held marine radios, sonarbuoys, video clock generators |
| JUPITER | Mitel | 0.7-5.3V; CDMA and FM filter (AMPS) I/Q filter |
| SP5769A | Mitel | 0.3-7.0V; 3GHz I2C bus synthesiser. For digital satellite, cable and terrestrial tuning systems, commnucations systems |
| NJ88C50IG | Mitel | 0.3-7.0V; 18mA; dual low power frequency synthesiser. For NMT, AMPS, ETACS cellular, GSM, IS-54, RCR-27 cellular |
| SL2035MP1T | Mitel | 0.3-7.0V; high performance broadband downconverter. For double conversion tuners, digital terrestrial tuners |
| MEB90812A | Mitel | Evaluation kit |
| PDSP16515AA0AC | Mitel | 0.5-7.0V; 18mA; stand alone FFT processor |
| MT91L61AN | Mitel | 3.0V; multi-featured codec (MFC). For battery operated equipment |
| MT9174AN | Mitel | Digital network interface circuit with receive sync marker bit. Applications TDD digital PCS (DECT, CT2, PHS) base stations requiring cell synchronisation; digital subscriber lines; high speed data transmission over twisted wires. |
| MH88612 | Mitel | 0.3-15V; subscriber line interface circuit. For PABX, intercoms, key systems, control systems |
| SP5658MP1S | Mitel | 0.3-7.0V; 2.7GHz 3-wire bus controlled frequency synthesiser. For SAT, TV, VCR, cable tuning systems |
| MT90732AP | Mitel | E2/E3 framer (E2/E3F). For line terminals, wideband data or video transport |
| MT8880CP | Mitel | Integrated DTMF transceiver for credit card systems, paging systems, repeater systems/mobile radio, interconnect dealers and personal computers. |
| MT3171BE | Mitel | 6V; 10mA; wide dynamic range DTMF receiver. For integrated telephone answering machine, end-to-end signalling, fax machines |
| MT91L62AN | Mitel | 3V; single rail codec. For cellular radio sets |
| SL1711MP1T | Mitel | 4.75-5.25V; 109mA; quadrature downconverter for satellite receiver systems |
| 1A358 | Mitel | 20V; 1300/1550mm high-performance PIN; for datacom, telecom, general purpose |
| MT8931CE | Mitel | 0.3-7.0V; +-20mA; subscriber network interface circuit. For ISDN NT1; ISDN S or T interface |
