| Partea Nu | Producător | Cerere |
|---|
| 1A229 | Mitel | 1.5V; 16mW; 870mm high-performance LED, for battery-operated equipment |
| 1A436 | Mitel | 0.5V; 160mW; 1300mm high-performance LED; for sensors, signal transmission |
| PDSP16515AC0AC | Mitel | 0.5-7.0V; 18mA; stand alone FFT processor |
| 1A277A | Mitel | 1.5V; 250mW; 880mm high-performance LED, for FM and baseband video |
| MH88632BT | Mitel | 0.3-7.0V; 14mA; central office interface circuit. For PBX, key telephone system, terminal equipment, digital loop carrier, wireless local loop |
| 1A239 | Mitel | 1.5V; 130mW; 840mm high-performance LED, for datacom, general purpose |
| MH88622-5 | Mitel | 0.3-15V; dual OPS SLIC. For pair gain, CT2, cordless local loops |
| WL600KG | Mitel | 4V 2.4-2.5GHz RF and IF circuit |
| SL1714 | Mitel | 0.3-7.0V; quadrature downconverter. For satellite receiver systems, data communications systems |
| 1A448 | Mitel | 1.5V; 35mW; 840mm VCSEL laser diode; for datacom |
| PDSP16256GC | Mitel | 5.0V; 20MHz; progarmmable FIR filter. For high performance digital filters |
| PDSP16488AB0 | Mitel | 5.0V; 20MHz; single chip 2D convolver with integral line delays |
| MT8880CC/CC-1 | Mitel | 6V; 10mA; integrated DTMF transceiver. For paging systems, repeater systems/mobile radio, credit card systems, personal computers, interconnect dialers |
| MT8814AE | Mitel | 4.5-13.2V; 15mA; 8 x 12 analog switch array. For key systems, PABX and key systems, mobile radio, test equipment/instrumentation, analog/digital multiplexers, audio/video switching |
| 1A359 | Mitel | 1.5V; 300mW; 780mm high-performance LED; for baseband video |
| MH88620IN | Mitel | C.O. Subscriber line interface circuit (SLIC) for central office line cards and on/off-premise PBX line cards. |
| MT9092AP | Mitel | 0.3-7V; 20mA; digital telephone with HDLC (HPhone-II). For fully featured digital telephone sets |
| MT8808AP | Mitel | 8x8 analog switch array. Applications key systems, PBX systems, mobile radio, test equipment and instrumentation, analog and digital multiplexers, audio and video switching. |
| MT8965AE | Mitel | 0.3-6.0V; 20mA; integrated PCM filter codec. For ST-BUS compatible, transmit/receive filters & PCM codec in one I.C. |
| MB6012 | Mitel | DNIC accessory kit. For use in supporting development activities |
| MT3370BS | Mitel | 6V; 10mA; wide dynamic range DTMF receiver. For integrated telephone answering machine, end-to-end signalling, fax machines |
| 1A239 | Mitel | 1.5V; 130mW; 840mm high-performance LED, for datacom, general purpose |
| SP5054SKGMPAS | Mitel | 64mA; 2.6GHz 3-wire BUS controlled synthesiser. For satellite TV, high IF cable tuning systems |
| MT8980DP | Mitel | 0.3-7.0V; 40mA; digital switch |
| SP5769KG | Mitel | 0.3-7.0V; 3GHz I2C bus synthesiser. For digital satellite, cable and terrestrial tuning systems, commnucations systems |
| MH80625C | Mitel | Protection SIP. Applications protection circuit for analog line interfaces, power suppliers, etc. |
| MT8888CN-1 | Mitel | Integrated DTMF transiver with Intel micro interface, enhanced to accept lower level signals. Applications credit card systems, paging systems, repeater systems/mobile radio, interconnect dialers and personal computers. |
| MH88622-2 | Mitel | Dual OPS Subscriber line interface circuit (SLIC) with 600 Om line interface for pair gain, CT2 and cordless local loop. |
| MH8981DC | Mitel | 5V; 30mW; digital switch |
| SP8802A | Mitel | 6.5V; 420mW; 3.3GHz + 2fixed modulus divider |
