| Partea Nu | Producător | Cerere |
|---|
| MAX878C/D | MaximIC | Step-up/step-down DC-DC converters |
| MAX436EPD | MaximIC | Wideband transconductance amplifier. 200MHz bandwidth. |
| MAX507ACWG | MaximIC | Voltage-output, 12-bit DAC with internal reference. 12 data-bus widths. Error +-1/2. |
| DG300ABWE | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX6337US25D2-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.5V, reset timeout(min) 20ms. |
| MAX6318MHUK29AX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6316MUK50BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX549AC/D | MaximIC | +2.5V to +5.5V, low-power, dual, 8-bit voltage-output DAC with an external reference input. |
| MAX4017ESA | MaximIC | Low-cost, high-speed, single-supply, gain of +2 buffer. |
| MAX6309UK34D2-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.315(min),3.485(max) Nominal timeout period 20ms. |
| MAX6320PUK40DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX4539EWP | MaximIC | Low-voltage, single 8-to-1 calibration multiolexer. |
| MX7576BQ | MaximIC | CMOS, microprocessor-compatible, fast conversion time 10 microsec, 8-bit ADC. INL +-1/2 LSB. |
| MAX4523CEE | MaximIC | Quad, low-voltage, SPST analog switch. |
| MAX693ACPE | MaximIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.4V. |
| MAX397EPI | MaximIC | Precision, dual 8-channel, low-voltage, CMOS analo0g multiplexer. |
| MAX6309UK32D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.120(min),3.280(max) Nominal timeout period 1ms. |
| MAX248C/D | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX4066ESD | MaximIC | Low-cost, low-voltage, quad, SPTS, CMOS analog switch. |
| MAX4542EKA-T | MaximIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX6306UK32D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.120(min),3.280(max) Nominal timeout period 20ms. |
| MAX4668CSE | MaximIC | 2.5om, quad, SPST, CMOS analog switch (two NO switches). |
| MAX6317HUK50DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MXD1000C/D75 | MaximIC | 5-tap silicon delay line |
| MAX6316MUK31DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX4112EUA | MaximIC | Single, 400MHz -3dB bandwidth, low-power, current feedback amplifier. |
| MAX6318LHUK34AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.400V min, reset timeout 1ms, typ watchdog timeout 102ms |
| MAX527CEWG | MaximIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1/2. Fast output settling 5micros. +-5V supply operation. |
| MAX4661EAE | MaximIC | 2.5om, quad, SWPST, CMOS analog switch (four NC switches). |
| DG302ACK | MaximIC | Quad, TTL compatible CMOS analog switch. |
